BIOPAK 60, CONVERTING FOR DIVING


  • Here is a few pictures ( the 2 on the left)of a Biopak60 before converting for diving


  • Before.jpg
    Before.jpg

    80.37 Kb
    Both.jpg
    Both.jpg

    71.10 Kb
    Inside.jpg
    Inside.jpg

    74.34 Kb
    Piping.jpg
    Piping.jpg

    52.69 Kb


  • Here is a few pictures of a Biopak60 that has been converted for diving


  • 60a.jpg
    60a.jpg

    40.99 Kb
    Vortex.jpg
    Vortex.jpg

    30.04 Kb
    Vortex2.jpg
    Vortex2.jpg

    38.10 Kb
    Vortex3.jpg
    Vortex3.jpg

    35.25 Kb

    If you do this,make sure:

  • Remember this is Life support equipment

  • You pick Low maintenance High quality materials must be especially chosen for resistance to the effects of the marine environment,
  • You build it so that just a rinse in fresh water is usually all the maintenance that's needed. other than periodic inspection of the valving.
  • You have someone that has experience with this type of underwater life support equipment to check over your work
  • Take into the pool ,NOT IN OPEN WATER,first with someone that has experience with this type of underwater life support equipment to try it first.Whatever you do don't do this by yourself,make sure you have somebody to fish out if you screw up.

  • This is brought to you to simply inform, you are responsible if you decide to modify one of these unit to dive with,Remember you are responsible for your own actions.


  • If interested in converting one of these ,we currently have 6 "as is" units available please E-mail us at:
  • divematics@divenet.com

    LINK (back to divenet


    All pages are copyright © 1998-1999 Future Designs Inc. unless otherwise noted, all rights reserved.